Start a new topic
Constructive Criticism & Complaints 224

Posted by Param Mehta, about 2 years ago , Last Reply by 26 days ago
Posted by Bill thresher, about 1 month ago
Posted by Pedro Feliciano, over 3 years ago , Last Reply by Bill thresher about 1 month ago , 1 vote
Posted by Jouko Lehtomäki, 3 months ago , Last Reply by David Busmann 2 months ago
Posted by Tom Versluys, almost 3 years ago , Last Reply by David Busmann 2 months ago , 3 votes
Posted by Nils.waldherr, 3 months ago , Last Reply by Nils.waldherr 2 months ago
Posted by MARCOS CUEVAS LOAIZA, 4 months ago , Last Reply by Thiago Medeiros Araujo 3 months ago
Posted by Hennag Hansen, 4 months ago
Posted by marc kerger, over 2 years ago , Last Reply by Jpperrein 4 months ago , 2 votes
Posted by Colin Weiss, 7 months ago , 1 vote

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library