Start a new topic
Solved

Old Forum

Very interresting that after the deletion of the old forum, also the topic with the discussion about the reasons was closed by admin.

So I tel it again. Without the tips and tricks of the experienced users there and the changes of the creatr that where included, the creatr never ould have printed ABS in a acceptable way.

And as you can see on the closed topic, this forum is very much influenced by leapfrog. So mayby the other forum at

creatrtips[dot]freeforums[dot]org


 is a better place to post you knowledge without the risk to be influenced.


Lets see how long this will be online.

Maybe a screenshot can keep it alive.


I would also very much like to have all that information back.

Until this new forum attracts some more attention, and until it becomes readable on my browsers (the light-grey and green text is almost invisible), I will be using:
     http://creatrtips.freeforums.org/index.php


Anyone who has a record of older forum entries, please post it back.  Haven't found anything back on Google yet.

Regards,

Marc

I have a dual Creatr purchased in 2012.  I found that forum extremely valuable and wish to again have access.  Surely someone could provide a link..

I think the old forum is gone for good.
It's not very active but you may want to check here:
creatrtips.freeforums.org

 

thank you.

Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library