Start a new topic

My model is not building up in a hook of 90 degrees

first I wanna know how to callibrate my platform, and which measerment i need  between extruders and heated platform

And can I callibrate my Y-axes manually .

My models look as if they are building up to one side.

Hope you can help me......



1 person has this problem

Hi Lambert,


Thank you very much for your interest in our Company.


Your Platform can be calibrated by unscrewing/screwing the index bolts from each corner of it.

Please make sure you have the same distance in each corner.The right distance is when you can slightly can move a piece of paper with light friction.


If you require any further explanation,please don't hesitate to contact us by opening a ticket via our Site


Kind regards,

Diana

Technical Support Team 

Dear Lambert


I believe you will find the answer HERE for the askew prints. Please have a look and let me know the conclusions.

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library