Start a new topic

High technical noise of my 3d printer

Hi everyone!

I'm a new user of leapfrog printer(model : Creatr '14)

During the printing process I noticed a high technical noise..is it normal?

Is very incovenient and for this sometimes is impossible run a print job!

I'm available for any questions and indications..

Best Regards

Orama factory


1 person has this problem

Hi Orama,


Please open a support ticket on our website at lpfrg.com and we will gladly have a look at the video and check the sound.

Hi,

I´ve encountered the same "sound" problem. Please check my "closed" service tickets concerning the noise during the print . I´m not really happy with the "we are working to fix this" - answer. The machine costs above 2k so please this could be a solvable problem.

 

Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library