Start a new topic

Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)

Hy


I'm a french company who've got 5 3D printer

My last printer is the creatr HS, and since I have it I cannon't print correctlywith it

I've got  a lot of problem.

Now the last problem,is :this error message:

Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)

Have you the solution?


I use simplify 3D , the latest version 


Thanks a lot


dominique

problème.png
(98.7 KB)

Hi Dominique,


You most probable have a thermistor failure or the generated gcode is incorrect. Please open a support ticket and we will gladly assist you with the issue.

thanks how can I do to open a support ticket?

you can go to lpfrg.com and then choose Support. You need to create an account and then you have the option to open a ticket where you can explain the problem.

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library