Start a new topic

"Standard moderation process" can delay your post showing up to other users for days......

From Cornel C.

>We have switched to this new and more improved system that will allow us to help our customers faster and better.

Okay Leapfrog guys, I understand that the old forum got a little out of hand. How is this better?

If you're not logged into the forum you can check how long a post takes to really appear so that others on the forum can read it. (Checked on multiple computers.) The fact that you wouldn't notice this if you're logged in is almost devious!

In one case a post that I made didn't show up until 9 days later!

If you're unable to do this process in a timely manner you should change it.

Edit: Interestingly, this post showed up immediately. Maybe something is broken?

1 Comment


Login or Signup to post a comment

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library