Start a new topic

Creatr HS: Add icon Settings (LCD)

Can you add icon setting in LCD :

- can change contrast of LCD

- can clean internal memory (8GB)

- can make update...

- print demo files...


- Format USB Key

- Print files calibration...

- Move Bed Down

Contrast for me is a big one and they need to face the LCD upwards more... The screen is like for a 4 foot tall person, or if I mounted the HS on the wall. LoL


All of your other suggestions for me are necessary. In fact I already told them to just copy the process of the bed leveling wizard into the software.


-B

Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library