Start a new topic

Win32

Hello, i have a creater with 2 extruders. When i want too slice a object i get a fould message.


21:06:57.517 : System.ComponentModel.Win32Exception: Het opgegeven uitvoerbare bestand is geen geldige Win32-toepassing.
bij System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
bij RepetierHost.view.Slic3r.RunSliceNew(String file, Single centerx, Single centery)



1 Comment

Do you have the Slic3r profiles downloaded and unzipped in "Roaming" and have selected the path for where Repetier can find the profiles?

Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library