Start a new topic

Leapfrog involvement (investment) on this forum ?

Does anybody know if Leapfrog is actively joining or monitoring this forum to help/assist and use comments to improve the product?

I'm just before the moment of buying one, but looking at the complains and the fact I never see any Leapfrog reaction makes me to decide otherwise. 

1 Comment

  Mr. Hans, thank you for your interest in our products.The forum exist for the clients to talk to each other and ask for tips. To talk with us, the technical support you can open any time a ticket and asked the questions you have.On the forum the clients don`t describe exactly the situation or they only are asking for advises for this we can`t monitor all the conversations.

   If you have questions about our products, please do not hesitate to open a ticket and ask all the questions you have.

  

  

Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library