Start a new topic

ColorFabb Bronzefill on Creatr HS

I just got a few new materials from colorfabb - and did the test prints.

CF - went allright.  But every time I tried printing with bronzefill I got the filament jammed in around the drive gear of the extruder. 

Anyone here with the good practice in printing the bronzefill on Creatr HS?


HI 

I am printing Brassfill and copperfill but you must make a adapter like I posted here 

http://software.lpfrg.com/support/discussions/topics/1000052457

you can probably even print one out of plastic.

after this you can use any soft filament even ninjaflex.


1 person likes this

Thanks, Marc!

I knew there is adapter like it exist made of plastic but i never thought somebody making them of metal.

Can you direct me to the link where I can buy one of them?

HI

I made this myself, today I dont know anyone who makes this. I hope Leapfrog will adopt it. I can post the 3D file.


1 person likes this

I already made the model myself, using your blueprints as a reference! - being printed now!

Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library