Start a new topic

boot problem

Hello


does anyone have the same problem? sometimes when I start my HS the front screen does not boot and just stays black. I have to turn off and on again and then usually it works OK.



2 people have this problem

Yes mine stays black also... restart won't help... looking for a solution!!! Jog wheel does't react as well... when I turn al the way to the right and press, it doesn't go to Home position.

Hi, I do have the same trouble. I did not use the printer since a few months, Remember that last time I had some issues with printing (bad quality) and din't understand why. Now, I turne it on, and black screen. Back off and on again and always black screen ... Any ideas to qualify what is happening ? Best regards, Jean-Pascal
Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library