Start a new topic

Print Profiles/help with duak color

Hi all


Looking for help with printing with the two extruders. I tryed using the dual extruder wizard and the normal print profiles but unsucessful. When i use the dual extrusion wizard it assumes i am using the second extruder for support and if i use the normal profiles the preview of the part becomes deformed. Here are some pictures:


Any thoughts?

Also if anyone could share some print profiles, i would be very thankfull


Regards

JS

1 Comment

Hey JS,


If you have a Creatr HS, check out the following solution with the downloadable print profiles: Print Settings for the Creatr HS in Simplify 3D


Many thanks,


Aaron C.

Leapfrog Customer Support Team

Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library