Start a new topic

simplify 3d 3.0 bugs/changes

HI

here are some strange things I would like changed in simplify 3D the new 3.0 version

- when I launch a print preparation it always selects all materials.. so I have to unselect all and reselect what i want

( it could also remember the material I selected in the list and also the models that are active instead of having to select them also in the material..)


1 Comment

   We don`t make the software Simplify 3D for this you can send your suggestions to the support team, here is the website:  https://www.simplify3d.com/contact-support/

Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library