Start a new topic



here is a good adress for good nozzles:

I use the pointy 0.4 now, works better.

 if someone needs 0,5 or 0.35 Stainless steel nozzles I have some for sale

Hi Marc,

I would be interested in some of the Stainless steel ones, both dimensions. 

Are they compatible with the standard Creatr HS hotend screws?

If yes, can you provide a quote with shipping costs to BS34 8UR (UK), please?



yes, they fit right on. how many do you want? they are 30€/p 

i'll pay transport, unless you want tracking.

HI Marc, Do you have any Stainless Steel Nozzles?

hi timm

yes I still have some, 0.35mm and 0.5mm

1 person likes this
Can u write me an Email to t.woszidlo(a) Thanks!
Login or Signup to post a comment

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library