Start a new topic

Print won't stick

Hi all,


next issue that I have:


The first layers are printed very well on the sticker. When I touch it with my finger, pushed to it everything sticks to the sticer.


But after a while one side came loose of the sticker and my print becomes unusefull.


Anyone how has a sollution?


regards

1 Comment

Hello Joris,


Would you mind telling me what filament type you are trying to print?


Also what is the default printing speed you are using and at what % is the first layer speed set to?


Let me know as I might be able to help you solve this fairly quick.

Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library