Start a new topic

Serial Cache Size


Please be aware that when changing the Serial Cache Size as mentioned in Knowledge base

How to configure Simplify 3D for better connection to the PC

Modified on: Tue, 18 Aug, 2015 at 12:26 PM

You also need to disable the auto updating of the profile's attached firmware settings by unchecking the update firmware configuration box in the G-Code tab.

Otherwise the settings will default back to original!

Thank You
1 Comment

Dear Wcubitt ,

That is correct, however with the new software update ( the 1.4.5 version ) and the new firmware ( the 2.3 version) you no longer have to increase the serial cache size in Simplify 3D for a stable connection .

You can find the steps on how to install the updates in the links below:

1. Update CreatrHS Stand-Alone software

2. Flash new firmware on the CreatrHS

3. Set extruder offset for your CreatrHS (M50)

Login or Signup to post a comment

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library