Start a new topic

Materialise settings explanations

Hi,

I'm wondering if there are some explanations somewhere on the web to help me explore Materialise settings.

Materialise Creatr manual don'r realy help me to understand build strategy options particularly.

Raft, skirt...

There are a lot of options I would like to explore in profile editor but have no idea on what they are supposed to do.

The Materialise Creatr manual said "TIP: For full description of all the available options in the profile editor, please revert to the Materialise Creatr Manual".

Any links would help me.

Thanks

1 Comment

I would suggest following the link below and in the bottom of the page there are a few instructional videos regarding the Materialise software:


http://www.lpfrg.com/en/products/supply/software/creatr-software-powered-by-materialise-186


Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library