Start a new topic

3 Starter packs - NO Software :(

I am doing a class later this summer at our local builderspace. Amazon recently put the Creatr Dual Starter Packs (not HS) on sale...I got three for the class.

They came with everything EXCEPT software. All three have thumb drives...that are blank. 

Amazon wants me to send the entire printer back... there a way to send my Serial Number in and get the software? Am I missing something? Very little on the web in the way of Forums but all said it supposed to be on thumb drive.



I am talking about the Simplify 3D software...I have already D/Ld the manuals and printed them out....


I would suggest you open a ticket addressed to Leapfrog Order and Shipping department and see if they can help you out. 

Login or Signup to post a comment

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library