Start a new topic

Bed adhesion

Hello, I've printed several parts with Avery sticker about successfully. I've removed it (too much damaged). So, After cleaning glass, I've tried to print Pla with Dimafix and Hair spray. 2 days of trails... form original Lpfrg pla setting to 230° - 75°. Nothing seems to stick. Head has been set with a normal paper sheet. So, isn't possible to print without this sticker ? What would be correct settings ? Bed and head temperature, nozzle height. Thanks,
1 Comment

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library