Start a new topic

Creatr 2.0 software, bug in object moving?

I try to move object by changing the position coordinate digits by typing manually: The object doesn't move until the integer in changed, too. I.E. 4.00--> 4.50 doesn't move the object, but 4.90--> 5.00 moves it. I guess there's a bug. Or am I doing or understanding something wrong? Video: https://www.youtube.com/watch?v=GNoSB6it-XU

Please note that the Creatr 2.0 is quite a old version and the Creatr 2.1 software was officially released.

https://www.lpfrg.com/en/materialise/download/

Sorry, a typo in version number. The problems concerns version 2.1 (not 2.0).
Mircea, how about the original problem, have you been able to repeat it and what is your conclusion?

I have checked and manually implementing the values does work. Are you sure you installed the official release?

Please note that the Creatr 2.1 version has been released for quite some time now so updating to the newer version may solve your problem.

Mircea, as I commented 10 days ago, the problem concerns version 2.1 (I accidentally wrote "2.0" in the topic).
[I'm sure I posted this message on 14th Dec, but for some reason it doesn't appear hear, so I re-post] Situation update: The problem still exist. More recent video: https://www.youtube.com/watch?v=LG4zxjWgMqE
Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library