Start a new topic

Creatr HS printing problem

Hello, I'm new to 3D printing and I'm facing a problem. I've calibrated correctly (I think) my Creatr HS, and I'm using simplify 3D to create gcode and print from my computer. When I print small pieces, my orints seems to be ok, but I've tried to print a 5 cm diameter piece and the result is awful. See attached image. I don't know what setting is wrong in my print, so I someone faced the same problem, I need his help :) Thanks...

I've forgot, it's printed with PLA, and I've tried Simplify 3D and Creatr default settings. Same results.
I've cleaned the nozzle, recalibrated the printer, modified some parameters on my print (bed temperature, outside layers, print speed), and the result is not perfect, but way better than the first one.
Login or Signup to post a comment

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library