Start a new topic

Creatr 2.1, builder file function?

I supposed that builder file would save all the parameters I do for the print - but no. It only saves item and its position, any printing settings are not saved. All the settings will be the same that were used last time (different printer and/or settings). Am I doing something wrong, is my Creatr 2.1 working improperly or is the software just useless? What use does the builder file have if it doesn't save settings?
1 Comment

Hello.


You would also have to export a bpprof. profile file.

To do so, you would have to click on "Edit profiles" and then on "Export".

Login or Signup to post a comment

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Filament Video Library